This package installs the software (Wireless LAN driver and Utility) to enable the following devices:

• ThinkPad 11b/g/n Wireless LAN Mini-PCI Express Adapter II

Note:

• If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below.
• This program is language independent and can be used with any language system.

	Supported ThinkPad Systems
	Supported Operating Systems
	Summary of changes
	Important information
	Requirements
	Installation instructions
	Uninstallation instructions
	Determining which version is installed

• Edge 13, Edge 14, Edge 15
• Edge E30, Edge E40, Edge E50
• L410, L510, L412, L512
• R400, R500
• SL410, SL510
• T400, T400s, T410, T410i, T410s, T410si
• T500, T510, T510i
• W500, W510, W701, W701ds
• X100e
• X200, X200s, X200 Tablet
• X201, X201i, X210s, X201 Tablet

• Microsoft Windows 7 32-bit, 64-bit

Where:

• [Important] Important update
• (New) New function or enhancement
• (Fix) Correction to existing function

Version 1.00.0029.8 (6IWS25WW)

• (Fix) Fixed an issue where wireless reconnection could not be made without rebooting after disconnection.

Version 1.00.0029.2 (6IWS24WW)

• (Fix) Fixed an issue where wireless reconnection might take long time.
• (Fix) Fixed an issue where wireless reconnection might fail after resuming normal operation from standby/suspend state.
• (Fix) Fixed an issue where the wireless On-Screen Display might show the wireless radio turned off after resuming normal operation from standby/ suspend state.
• (Fix) Fixed an issue where an error was shown when manually installing the version 1.00.0026.0 (Build ID: 6IWS21WW).

Version 1.00.0026.0 (6IWS21WW)

• (Fix) Fixed an issue where wireless network is disconnected when VPN is established
• (Fix) Fixed an issue where wireless connection might fail with PEAP-GTC.
• (Fix) Fixed an issue where wireless connection failed with the wireless channel 12 or 13 when SSID was not broadcasted (Stealth mode).

Note:
Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.

The following version of this software has a chance of 'ThinkPad 11b/g/n Wireless LAN Mini-PCI Express Adapter II' card unusable.

The problem was fixed with the following version, so update your software to the latest one.

• If you use ThinkVantage Access Connections, the following software must be installed.
  • ThinkVantage Access Connections for Windows 7 version 5.62 or higher
  • ThinkPad Power Management Driver for Windows 98 SE/Me/2000/XP/Vista/7 version 1.60 or higher.
  • Hotkey Features Integration for Windows 7/Vista/XP/2000 version 3.02.0000 or higher.
• You may need to re-enter security information after updating the Wireless LAN driver.

Notes:

• There are pre-requisites before installing this software. Click here for the list of pre-requisites.
• If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Determining Which Version is Installed section.

This section assumes to use Internet Explorer and Windows Explorer.

[Downloading file]

1. Click once on the underlined file name. Once this is done, some pop-up windows will appear.
2. Follow the instructions on the screen.
3. In the window to choose Run or Save, click the Save button.
4. Choose the folder you would like to download the file to and click the Save button. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

[Extracting file]

5. Make sure to be logged on with an administrator account.
6. Locate the directory where the file was downloaded.
7. Locate the file that was downloaded and double-click it.
8. Follow the instructions on the screen.
9. In the "Select Destination Location" window, click Next. If you would like to select a different folder, click Browse.
10. In the "Ready to Install" window, click Install. All the necessary files will be extracted to the folder selected in the step 9.

[Installing files]

11. Make sure the checkbox next to "Install ..... now" is checked and click Finish.
12. Follow the instructions on the screen to complete installation and restart the computer.

Finally delete the file saved in Step 4.

Note: This is for system administrator's use only.

1. Refer to the "Manual Install" section, and download and extract the file.
2. In the step 11 of the "Installing files" section, uncheck the checkbox next to "Install ..... now", and then click Finish to cancel installation.
3. At the command line, execute setup.exe with the -S option.
   Example: [Path where the files were extracted]\setup -S

1. Start Windows and logon with administrative privileges.
2. Click Start, click Control Panel, then click Programs.
3. Make sure View by Category is selected, and click Uninstall a program.
4. Select ThinkPad Wireless LAN Adapter Software, and click Uninstall or Uninstall/Change.
5. Follow the instructions on the screen to complete uninstallation and restart the computer.

To check the version of software, please perform the following steps:

1. Click Start, then click Control Panel.
2. Make sure View by Category is selected, and click Uninstall a program.
3. Click Organize, select Layout, then select Details Pane. The Details Pane will be shown at the bottom of screen.
4. Select ThinkPad Wireless LAN Adapter Software.
5. Check the product version in the Details Pane.

The following versions have been released to date. Access Connections for each of those versions are also available.