Choose Your Product
No Product SelectedSelect Product
No video display on CRT monitor when using DisplayPort to VGA Monitor Cable - ThinkCentre A58, A63, M58, M58e, M58p
Symptom

When the user connects the to Lenovo DisplayPort to VGA Monitor Cable (Option P/N: 57Y4393, FRU P/N: 57Y4141 or 45J9524, Manufacturing P/N: 57Y4140) to the CRT monitor VGA cable, they will not see video on the CRT until Microsoft Windows loads the video drivers.

Affected configurations

The above symptom may occur on the following systems but not limited to only these listed below.

  • ThinkCentre A58, A63, M58, M58e, M58p

Applies to:

  • Microsoft Windows Vista
  • Microsoft Windows XP Professional
  • Microsoft Windows XP Home Edition
Solution

None. Do not replace any hardware for this issue.

Limitation

This is an EDID failure from the CRT monitor. The video card treats a DisplayPort to VGA Monitor Cable as a standard DisplayPort device. Therefore, when the video card fails to receive EDID information in a timely manner from the CRT, the CRT monitor will be blank until the operating system loads the video driver.



If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : HT003850
Legacy Document ID : SF09-D0077
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Technical Specifications - PSREF
Driver Matrix
Newly Released Drivers (RSS)
Community
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support

Premium-Support