Summary of Changes
	Requirements
	Installation Instructions
	Uninstallation Instructions
	Determining which version is installed
	Known issues and solutions

Where:

• ( ) Build ID for administrative purpose
• [Important] Important update
• (New) New function or enhancement
• (Fix) Correction to existing function

Version 1.05.2000 (6JWC22WW)

• (New) Initial release after integrating the following packages.
  • Intel WiMAX for Intel WiMAX/WiFi Link 5150 (6JWC21WW)
  • Intel WiMAX for Intel WiMAX/WiFi Link 5350 (6JWC04WW)
• (New) Added support for Intel WiMAX/WiFi Link 5350.
• (New) Added support for ThinkPad T400, T500, W500, W700, W700ds, X200s, X200 Tablet.
• (Fix) Corrected a mistake where ThinkPad X200 Tablet supported Intel WiMAX/ WiFi Link 5150. (ThinkPad X200 Tablet supports Intel WiMAX/WiFi Link 5350 only.)
• (Fix) Fixed an issue where online activation of UQ WiMAX might fail upon WiMAX connection.

Note:
Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.

Note: Make sure that the following driver prerequisite were installed on your system before installing this driver

• Microsoft .NET Framework 2.0
  (Download installer from http://www.microsoft.com)
• UDP port 2948 needs to be opened in the firewall for successful activation and provisioning. Depending on the computer's firewall and security settings, the firewall's settings may need to be changed to allow the required communications.
• If you use Access Connections, the following must be installed.
  • For ThinkPad SL300,SL400,SL400c,SL500,SL500c
    • Microsoft .NET Framework 2.0 or later
    • ThinkVantage Access Connections for Windows XP/2000 version 5.50 or higher.
    • ThinkPad Power Management Driver for SL Series for Windows 7/Vista/XP version 1.44 or higher.
    • Hotkey Features for Windows 7/Vista/XP/2000 version 3.02.0000 or higher.
    • ATK Hotkey Driver for Windows Vista/XP version 0.00.04.0 or higher.
  • For the other ThinkPad models
    • Microsoft .NET Framework 2.0 or later
    • ThinkVantage Access Connections for Windows XP/2000 version 5.50 or higher.
    • ThinkPad Power Management Driver for Windows 98 SE/Me/2000/XP/Vista/7 version 1.60 or higher
    • Hotkey Features for Windows 7/Vista/XP/2000 version 3.02.0000 or higher.

• If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.

This section assumes to use Internet Explorer and Explorer.

[Downloading file]

1. Click once on the underlined file name with the left mouse button. Once this is done, some pop-up windows will appear.
2. Follow the instructions on the screen.
3. In the window to choose Run or Save, click the Save button.
4. Choose the folder you would like to download the file to and click the Save button. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

[Extracting file]

5. Make sure to be logged on with administrative account.
6. Locate the directory where the file was downloaded.
7. Locate the file that was downloaded and double-click it.
8. Follow the instructions on the screen.
9. In the "Select Destination Location" window, click Next. If you would like to select a different folder, click Browse.
10. In the "Ready to Install" window, click Install. All the necessary files will be extracted to the folder selected in the step 9.

[Installing files]

11. Make sure the checkbox next to "Install ..... now" is checked and click Finish.
12. Follow the instructions on the screen.
    Note:
    If you use ThinkVantage Access Connections, Intel PROSet/Wireless component needs to be installed as pre-selected during the above procedure.
13. Follow the instructions on the screen to complete installation and restart the computer.

Finally delete the file saved in Step 4.

1. Refer to the "Manual Install" section, and download and extract the file.
2. In the step 11 of the "Installing files" section, uncheck the checkbox next to "Install ..... now", and then click Finish to cancel installation.
3. At the command line, execute Autorun.exe with the -QN option.
   Example: [Path where the files were extracted]\Autorun /QN

Note:

• If winlogon.exe error or any problem occurs after uninstalling the software, re-install any version of the software for problem solving.

1. Start Windows and log on with administrative account.
2. Click Start, then click Control Panel.
3. Select Add or Remove Programs..
4. Select Intel(R) PROSet/Wireless WiMax Software, and click Remove or Change/Remove.
5. Follow the instructions on the screen to complete uninstallation and restart the computer.

Or

1. Start Windows and logon with an administrator account.
2. Refer to the "Manual Install" section, and download and extract the file.
3. In the step 11 of the "Installing files" section, uncheck the checkbox next to "Install ..... now", and then click Finish to cancel installation.
4. Click Start, then click Run.
5. Type [Path where the files were extracted]\Autorun.exe and click OK.
   Example: [Path where the files were extracted]\Autorun.exe
6. Follow the instructions on the screen to complete uninstallation and restart the computer.

1. Click Start, then click Control Panel.
2. Select Add or Remove Programs.
3. Select Intel(R) PROSet/Wireless WiMAX Software, then click Click here for support information.
4. Check the software version.

1. Click Start.
2. Right-click My Computer, then click Properties.
3. Click the Hardware tab, and then click Device Manager.
4. Double-click the Network adapters category.
5. Double-click any of the following devices:
   • Intel(R) Wireless WiMax Link 5150
   • Intel(R) Wireless WiMAX Link 5350
6. Click the Driver tab.
7. Check Driver Version.

1. Click Start.
2. Right-click My Computer, then click Properties.
3. Click the Hardware tab, and then click Device Manager.
4. Double-click the Network adapters category.
5. Double-click Intel(R) Wireless WiMAX Link Function Driver.
6. Click the Driver tab.
7. Check Driver Version.

The following versions have been released to date. Access Connections for each of those versions are also available.

Where;

• 5150/5350 : Intel Wireless WiMAX Link 5150/5350 Driver
• Function Driver: Intel Wireless WiMAX Link Function Driver device

ThinkVantage Access Connections will not work if Windows XP Software Network Bridge connection is created.
To recover the ThinkVantage Access Connections function:

1. Start Windows XP and logon with administrative privileges.
2. Click Start, select Settings, click Control Panel, then click Network Connections.
3. Confirm that the following Device Name belongs to Network Bridge.
   Intel(R) Wireless WiMax Link 5150
   Intel(R) Wireless WiMAX Link 5350
4. Right-click its Name (Wireless Network Connection).
5. Click Remove from Bridge.
6. Confirm that it belongs to "LAN or High-Speed Internet".
7. Right-click its Name again and click Properties.
8. The Wireless Network connection Properties tab will open and under the General tab, Check at WLAN Transport.
9. Restart the system.