1. Install 2x2TB Hdd’s and Power on.
2. Press F1 to enter BIOS Setup Utility.
3. Select Devices --> ATA Drives Setup --> SATA Mode.
4. Select RAID Mode.
5. Press F10 Save and Exit.
6. Press "Ctrl + I" key to enter in RAID setup utility when booting and then set HDD in RAID0 mode.
7. Press F1 to enter BIOS Setup Utility.
8. Choose System Summary. You can observe the HDD information in it.
9. Choose Startup --> Primary Boot Sequence You cannot observe the RAID HDD item in it.

The above symptom is associated with, but not limited to, the following systems:

• ThinkStation E30

Applies to

• All Operating System
  

None. Do not replace any hardware for this issue.

No support for larger than 2TB with Intel Rapid Storage Technology 10.0