• Input voltage: 90 to 264V ac
• Frequency: 50/60 Hz
• Power consumption:
  • Maximum: 22 watts
  • Normal use: 17 watts typical
  • Standby: < 1watts
  • Suspend: < 1watts
  • Off: < 0.5 watt
  • Maximum earth leakage current:
    • < 3.5 mA at 264 V
    • < 0.25 mA at 100 V

Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.

• One monitor
• Attached tilt stand
• Attached 1.8-meter (5.9-foot) analog video signal cable (15-pin D to 15-pin D)
• Power cord
• A CD containing multilingual user's guide, set-up test pattern, and .INF file
• Setup guide
• Safety and warranty information

Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.

Three years - Customer Carry-in or Mail-in using Rapid Replacement Service

• Announce date: 17 Sep 2008 (Europe/Middle East/Africa)
• Planned availability date: 19 Sep 2008 (Europe/Middle East/Africa)

• Microsoft Windows Vista
• Microsoft Windows XP

• TCO'03 Environmental Label
• MPR-2
• ISO/DIS 13406 Part 2
• Software: Microsoft 2000/XP
• EU Directive 2002/96/EC - WEEE
• EU Directive 2002/95/EC - RoHS
• EPA
• GS

IEC950 CB Report, NEMKO (Norway), SEMKO, DEMKO (Denmark), FIMKO (Finland), TUV (Germany), TUV-S (Argentina), SASO (Saudi Arabia), GOST (Russia), South Africa

• Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
• Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
• Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
• The number of colors shown in any display mode (up to a maximum of 16.7 million) is not limited by the monitor, but depends on the capabilities of the video adapter in the system unit..
• Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
• Implementation of monitor Plug-And-Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug-And-Play to be effective.
• Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
• A 19.0-inch Wide TFT monitor has nearly 4 million subpixel transistors laid over an area exceeding 162 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. The Lenovo ThinkVision L1940 Wide meets ISO 13406-2 Class II Pixel defect standard.
• The auto-setup "test pattern" can be used with Windows 3.1, Windows NT 3.5, Windows NT 4.0, Windows 95, Windows 98, Windows 2000, Win- dows XP, and DOS 7.0 only.