When prompted, select a drive and directory in which to save the downloaded file.
<Complete version history of released code>
Summary of changes where: < > Version number [Important] Important update (New) New function or enhancement (Fix) Correction to existing function
<Version 2.50/3.90> <3.90 changes> (Fix) - Update CPU microcode to fix Virtual-APIC Page Accesses With 32-Bit PAE Paging May Cause a System Crash
<2.50 changes> (Fix) - Update CPU microcode to fix Virtual-APIC Page Accesses With 32-Bit PAE Paging May Cause a System Crash
<Version 2.30/3.80> <3.80 changes> (Fix) - Fix it can't dump all BIOS SETUP settings using the AMI SCE utility. - Remove the secure boot module. - Fix the USB flash disk boot sequence abnormal after load default or BIOS flash. - Fix "F10" key boot to network function fail. - Fix sometimes it can't detect virtual USB device when flash BMC under DOS. - Fix ¡°USB Legacy Support¡±,"Port 60/64 Emulation" items changes can't be saved.
<2.30 changes> N/A
<Version 2.30/3.60> <3.60 changes> (New) - Add Windows Server 2012 OS support.
<2.30 changes> N/A
To update the server BIOS using this BIOS update package, do the following:
Attention: Do not turn off your server when updating the BIOS, otherwise the BIOS will fail to be updated and the system will fail to restart.
Download the package, extract and copy the extracted package to C:\.
Close all open applications.
Click Start, then click Run, enter the extracted package folder.
Start the update process according to below cases:
If the current BIOS version is 2.50 or lower ,please run the Step1.bat to start the update process. When there is "[SDP Message]:Version Control is done , Please Reboot System" shown , the whole update process is complete.
If the current BIOS version is 3.20 or higher , please run the Step1.bat to start the update process. When there is "[SDP Message]:If you want to restore BIOS settings , please execute <step2.bat> after reboot" shown, if you do not want to restore settings the whole update process is complete. If you want to restore BIOS settings, please reboot sytem and enter the package folder then run the Step2.bat . When there is message"Script file imported successfully" shown, the whole update process is complete .
Notice1 : At the first time after you flash BIOS, system may reboot automatically when boot to device or enter RAID WebBIOS.It is normal.
Notice2 : After executing the Step1.bat and reboot, if your system is configured with LSI 9240/ LSI 9260 RAID card and UEFI operation system, when it fails to boot to operation system, you need to enter BIOS SETUP and set "BootOptions"->"CSM parameters"->¡°Launch Storage OpROM policy¡±to "UEFI only" manually.