Choose Your Product
No Product SelectedSelect Product
Cable damage may cause the system to hang, power off, or fail to boot - ThinkCentre A50, A51, A52, M52, S50, S51
Symptom

The system may fail to boot or complete post during startup, or it may hang or power off during use. The cable insulation may be damaged.

Open case view showing chassis fan assembly. The fan cable harness may become pinched in-between the edge of the front chassis frame rail (green arrow) and the bottom edge of the front panel metal frame (red arrow).

Pinch points

Closed case view with front panel and fan mesh removed. The fan cable harness may become pinched between the edges of the front and bottom metal frames.

Pinched cable

The cable will be damaged as illustrated below

Damaged cable

Affected configurations

Any of the following systems:

  • ThinkCentre A50 (type 8320, 8419)
  • ThinkCentre A51 (type 8424, 8425, 8428)
  • ThinkCentre A52 (type 8155, 8156, 8157, 8158, 8159, 8160, 8289, 8298, 8328, 8341, 8344, 8382)
  • ThinkCentre M52 (type 8099, 8116, 8215, 9210, 9211)
  • ThinkCentre S50 (type 8092, 8183, 8184, 8416, 8417, 8418)
  • ThinkCentre S51 (type 8098, 8171, 8172, 8173)
Solution

Repair or replace cables as necessary. Route the cables to prevent pinching.



If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : HT001161
Legacy Document ID : SF06-D0039
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Technical Specifications - PSREF
Driver Matrix
Newly Released Drivers (RSS)
Community
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support