The system is configured to boot to PXE first and then the hard disk drive. The user turns the system on and it fails to PXE boot or the user presses Escape to abort the PXE boot. The boot sequence continues to the next device and the system hangs.
The above symptom is associated with the following systems:
The user should update the BIOS as applicable below:
F1KT52A (or higher) / F4KT40A (or higher):
ThinkCentre Edge 72e:
F1KT52A (or higher):
ThinkCentre M82/ M92/ M92p/ Edge 92:
9SKT68A (or higher):
9SKT68A (or higher)
Perform the following after updating the BIOS:
The PXE boot image is not a UEFI image.