Input voltage: 100 to 240 V ac +/- 10% (universal voltage)
Frequency: 50/60 Hz
Maximum: 31 watts
Typical: 21 watts typical
Standby: <1 watts
Suspend: <1 watts
Off: < 0.5 watts at 100 V ac
Maximum earth leakage current:
< 3.5 mA at 264 Vac
< 0.25 mA at 100 Vac
Note: Typical power consumption is tested EPA4.1 method
Ambient temperature and relative humidity
0 to 40 deg.C
10 to 80 %
0 to 8,000 ft
-20 to 60 deg. C
5 to 95 %
0 to 40,000 ft
-20 to 60 deg. C
5 to 95 %
0 to 12,000 ft
Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.
Attached tilt stand that can be removed
Attached 2.2-meter (-foot) analog video signal cable (15-pin D to 15-pin D) that can be removed
A 3 -> 2 pin AC adapter (Japan only)
A Japanese proof of purchase card (Japan only)
A CD containing multilingual user's guide, setup test pattern, and Windows installation file
Safety, troubleshooting, and warranty information
Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.
Three years - Customer Carry-in or Mail-in using Rapid Replacement Service
Announce date: 17 Sep 2008 (Worldwide)
Planned availability date: 24 Oct 2008 (Worldwide)
Announce date: 11 Nov 2008 (Topseller: Europe/Middle East/Africa)
Planned availability date: 02 Dec 2008 (Topseller: Europe/Middle East/Africa)
The display is intended to operate with system units or video adapters that generate a video output signal falling within the following specification:
1680 x 1050 pixels
Maximum pixel rate
The monitor supports VESA Standard Timings as detailed in "Display Monitor Timing Specification," Version 1.0, Revision 0.8, dated September 17, 1998, for the following modes:
VGA: 640 x 480 at 60, 66, 72, and 75 Hz
SVGA: 800 x 600 at 60, and 75 Hz
XGA: 1024 x 768 at 60, 70, and 75 Hz
This monitor also supports the following modes:
640 x 350 at 70 Hz
720 x 400 at 70 Hz
Note: National language support is a function of the video adapter in the system unit and the application or support software.
Preset Display Modes
Addressability (H x V Pixels)
Incoming video refresh rate
640 x 350
640 x 480
720 x 400
800 x 600
1024 x 768
1152 x 864
75 Hz NI
1280 x 1024
1440 x 900
User modes: 20
The preset modes cannot be overwritten, but can be adjusted to personal choice. The new settings are stored automatically in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the reset control.
Information about the current incoming display mode is shown in the on-screen displays. However, it is displayed at the LCD panel's optimum refresh rate of 60 Hz.
It may be necessary to make some adjustments to the displayed image to compensate for variations in video signal timings. The user controls can be used to make these adjustments.
Compatibility The ThinkVision L2240p 22-inch Wide Flat Panel LCD Monitor (4422-HB6 and Topseller 4422-HS6) is supplied with a detachable 2.2-meter (5.9-foot) video signal cable. This cable has the widely used 15-pin, D-Sub video connector for system unit connection cable.
This model has been tested with ThinkPad and ThinkCentre systems. It is compatible with systems and graphics adapters that comply with the relevant parts of "VESA and industry standards and guidelines for computer display monitor timing" Version 1.8, adopted September 17, 1998. Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor plug and play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.
Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
This monitor provides FCC class B - residential installation - compliance in all display modes.
Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
A 22.0-inch (mm) flat-panel LCD monitor has nearly 5.3 million subpixel transistors laid over an area exceeding 217 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. The Lenovo ThinkVision L2240p Wide meets the ISO 13406-2 Class II Pixel Defect follows:
The Auto-Setup "test pattern" can be used with Windows 2000, Windows XP, Windows Vista, and DOS 7.0 only.