Sagen Sie uns, welches Produkt Sie haben, und wir passen den Support für Sie an!
Kein Produkt ausgewähltSelect Product
How to enter Setup Utility (F1) or Boot Menu (F12) on a Microsoft Windows 8/8.1 preloaded PC.

 

Symptom

After shutting down the Microsoft Windows 8/8.1 PC and turning the system back on, it is not possible to enter BIOS Setup (by pressing F1) or the Boot Menu (by pressing F12).

Affected Configurations

The above symptom is associated with, but not limited to, the following systems:

  • ThinkPad

Affected Systems (machine types, model types):

  • All ThinkPad models with Microsoft Windows 8/8.1 preload.

System is configured with:

  • Microsoft Windows 8/8.1.
Applies to
  • Microsoft Windows 8/8.1
Additional Information

By default, a Windows 8/8.1 shutdown is not a real shutdown. Instead, it is hybrid shutdown where contents of memory are saved to disk. This allows for a faster startup. However, turning on the PC after a hybrid shutdown does not allow for pressing F1 or F12 during startup.

Solution

There are several ways to enter Setup Utility (F1) or the Boot Menu (F12) on a Microsoft Windows 8/8.1 PC as explained below:

  1. Press and hold the Shift key while selecting the Shutdown option in Windows 8. This will make the PC perform a full shutdown instead of a hybrid shutdown. Then F1 or F12 can be pressed successfully during startup.
  2. Select Restart instead of Shutdown. Then F1 or F12 can be pressed successfully during startup.
  3. Disable the fast startup option in Control Panel -> Hardware and Sound -> Power Options -> Choose what the power buttons do.

It is also possible to access these features from within Windows 8/8.1.

To enter Setup Utility:

  1. Open the Charm Bar by pressing Windows Key-C
  2. Click on Settings
  3. Click on Change PC Settings
  4. Click on General
  5. Scroll to the bottom and click on Advanced Startup -> Restart Now
  6. Click on Troubleshoot
  7. Click on Advanced Options
  8. Click on UEFI Firmware Settings
  9. Click on Restart

To access the Boot Menu:

  1. Open the Charm Bar by pressing Windows Key-C
  2. Click on Settings
  3. Click on Change PC Settings
  4. Click on General
  5. Scroll to the bottom and click on Advanced Startup -> Restart Now
  6. Click on Use A Device
  7. Click on Boot Menu
Trademarks

Lenovo, ThinkCentre, ThinkStation, and ThinkPad are trademarks of the Lenovo Corporation in the United States, other countries, or both.

Microsoft, Windows, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Additional Lenovo Support Information


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Staat Verfügbarkeit
VerfügbarWorldwide
Alias ID : SF13-T0025
Dokument-ID : HT076906
Legacy Document ID : SF13-T0025
Zuletzt aktualisiert :
© 2013 Lenovo. Alle Rechte vorbehalten.
   
Wählen Sie Aufgabe
 
Treiber & Software  
Handbücher  
Diagnose & Fehlerbehebung  
Garantie & Service  
Ersatzteile  
Zubehör  

Zusätzliche Quellen
Treiber Matrix
COMMUNITY
Community Wissensdatenbank
Community Foren
Lenovo Assisted Search