Sagen Sie uns, welches Produkt Sie haben, und wir passen den Support für Sie an!
Kein Produkt ausgewähltSelect Product
G580/G480/G485/G585 Cannot access BIOS
Symptom

Customer installed Windows 7 64-bit and drivers. After the installation of intel hd graphics driver and laptop restart, Windows is unable to start normally. Windows will try to start the automatic startup recovery program (which is recommended by default). But this program will fail in resolving the problem. When Windows tries to start normally, it result in a blue screen. After windows restart, the boot menu is not showing through F12 key. F2 key for BIOS access is also not working.

 

Affected configurations

The symptom above may occur to the following systems:

G480/G580/G485/G585 without pre-installed OS

 

Solution

1. Try to remove the hard disk and do a reset by draining the power (press power button for 10 seconds without battery and AC adapter).
2. Try to enter bios using F2 key.


If you are successful in entering the bios, Load up Bios default settings by F8 key within BIOS. Connect the Hard drive back and check again if you are able to access BIOS by pressing F2 key.

If the steps above didn't fix the issue, Bios will need to be re-flashed.

 



If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Staat Verfügbarkeit
VerfügbarWorldwide
Alias ID : IN20121112-001
Dokument-ID : HT075709
Legacy Document ID : IN20121112-001
Zuletzt aktualisiert : 16 May 2014
© 2013 Lenovo. Alle Rechte vorbehalten.
   
Wählen Sie Aufgabe
 
Treiber & Software  
Handbücher  
Diagnose & Fehlerbehebung  
Garantie & Service  
Ersatzteile  
Zubehör  

Zusätzliche Quellen
Unterstützungsindex
TECHNISCHE DATEN - PSREF
Treiber Matrix
Neu veröffentlichten Treiber (RSS)
Community
Community Wissensdatenbank
Community Foren
Lenovo Assisted Search