Print
Anmeldung nur für Service Provider
login Konto
Search
Nicht unterstützter Browser erkannt:Lieber Besucher,der von Ihnen verwendete Browser wird nicht von dieser Website unterstützt. Bitte klicken Sie für weitere Informationen über die Browserhier die wir unterstützen und wie sie zu erhalten sind..

ExpressCache & IFFS Partition Recreation

Use this procedure if you are replacing an mSATA drive

Preparation
  1. Determine which configuration your product supports (Cache only or Cache+IFFS)
  2. Install ExpressCache application in a Windows 7 system.(No mSATA attached)
  3. Copy the vbs files into any directory, e.g. c:\SWTOOLS\

 

Configuring the Partition:
  1. Plug mSATA into the unit (ExpressCache and vbs file ready).
  2. Run cmd.exe with administrator rights (start->all programs->accessories->command prompt)
  3. cd c:\SWTOOLS\ (go to your vbs directory )
  4. xxxx.vbs (input corresponding vbs file)
  5. Press Enter (warning message will popup if mSATA / ExpressCache is not ready or partition exists in mSATA)
  6. Reboot after successful information appears.

 

Supplement

During the running of above vbs file, the following popup message may appear:

  1. "You have not installed Diskeeper ExpressCache, Please install the Software first"
    • Please install ExpressCache application first , then run the vbs file again.
  2. "There is NO mSATA detected, please check mSATA attached"
    • Please plug your mSATA device first, then run the vbs file again.
  3. "You have partitions on your mSATA device. Please back up and delete it"
    • Please run clean_msata.vbs first (same step as above vbs file), then run the previous vbs file again.

 


  • Alias ID:
  • Document ID: HT073737
  • Letztes Update :17 Jun 2014
  • (c) 2014 Lenovo