|Display size||17.0 in (432 mm)|
|Maximum viewable area||340 x 272 mm|
|Maximum Resolution/pixel rate (Hz)||1280 x 1024/76Hz|
|Dot/Pixel pitch||0.264 mm|
|Brightness (typical)||270 cd/m2|
|Contrast (typical)||500 : 1|
|Cell response time (typical)||8 ms|
|Video input||VGA Analog|
Horizontal: 140 degrees
Vertical: 130 degrees
|Tilt||Tilt: Vertical: 4 degrees forward / 30 degrees backwards|
|Acoustics||LWAD = 4.5 bels or less|
|Dimensions (monitor and stand)|
Weight: 10.8 lb (4.9kg)
Height: 15.2 in (387 mm)
Width: 14.6 in (371 mm)
Depth: 6.4 in (162 mm)
|Power requirements||Input voltage: 100 to 240 V ac +/- 10%|
Frequency: 50/60 Hz +/-3 Hz
Power consumption (Normal Use): < 30 watts typical
Power consumption (VESA Standby): < 2 watts analog
Power consumption (VESA Suspend): < 2 watts analog
Power consumption (VESA Off): < 1 watt
Maximum earth leakage current: < 3.5 mA at 264 V
Maximum earth leakage current: < 0.25 mA at 100 V
|Power cord - detached||1.8 m|
* The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.
Note: Actual power consumption depends on the screen mode used, the images displayed, and how user controls are set.
- One monitor
- Tilt stand with customer installed base
- Attached 1.8-meter analog video signal cable (15-pin D to 15-pin D)
- Power cord
- CD containing multilingual user's guide, set-up test pattern, and .INF file
- Setup Poster
- Safety, Troubleshooting, and Warranty Guide
Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers
3 year Limited - customer carry-in exchange
- Announce date: 21 Mar 2006
- Planned availability date: 24 Mar 2006 (Europe/Middle East/Africa)
The L171 LCD monitor is intended to operate with system units or video adapters that generate a video output signal falling within the following specification:
- Maximum addressability (pixels) 1280 x 1024
- Maximum pixel rate (MHz) 140
The L171 supports VESA Standard Timings as detailed in "Display Monitor Timing Specification," Version 1.0, Revision 0.8, dated September 17, 1998, for the following modes:
- VGA: 640 x 480 at 60, 66, 72, and 75 Hz
- SVGA: 800 x 600 at 60, 72, and 75 Hz
- XGA: 1024 x 768 at 60, 70, and 75 Hz
- SXGA: 1280 x 1024 at 60, 70, and 75 Hz
The L171 also supports the following modes:
- 640 x 350 at 70 Hz
- 720 x 400 at 70 Hz
- 1280 x 1024 at 76 Hz
Note: National language support is a function of the video adapter in the system unit and the application or support software.
- MPR-3 (Sweden)
- ENERGY STAR (U.S.)
- ISO 13406-Part 2
- EU Directive 2002/96/EC - WEEE
- EU Directive 2002/95/EC - RoHS
- Software: MS 2000/XP
UL (U.S.), CSA/cUL (Canada), IEC950 CB Report, NEMKO (Norway), SEMKO, DEMKO (Denmark), FIMKO (Finland), TUV, CCC (China), NOM, SASO, GOST, PSB (Singapore), Jordon, BSMI, Australia, JEITA, UL-S (Argentina), Green Mark (Taiwan), FCC B (U.S.), IC (Canada), CE (Europe), (MIC) Korea, VCCI Class B (Japan), South Africa, New Zealand
- Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
- Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
- Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
- The number of colors shown in any display mode will exceed 16 million and is dependent on the capabilities of the video adapter in the system unit.
- The ThinkVision L171 provides FCC class B - residential installation - compliance in all display modes.
- Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system
- implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
- Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
- Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
- A 17.0-inch TFT monitor has nearly 4.0 million subpixel transistors laid over an area exceeding 140 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. The L171 meets the ISO 13406-2 Class II Pixel Defect Standard.
- Use of 50% gray background is not recommended since some users may see undesireable FOS effects.
- The Auto-Setup "test pattern" can be used with Windows 3.1, Windows NT 3.5, Windows NT 4.0, Windows 95, Windows 98, Windows 2000, and DOS 7.0 only.