Print
login Account
Search
Unsupported Browser Detected: Dear user, the browser you’re currently using is not supported by this website. Please click here for more information about the browsers we support and how to obtain them.

Battery pack removal and installation - ThinkPad X100e and X120e

Battery pack removal and installation

Important notice for replacing a battery pack:
Lenovo ThinkVantage Toolbox have an automatic battery diagnostic that determines if the battery pack is defective. A battery pack FRU should not be replaced unless this diagnostic shows that the battery is defective.

The only exception to this is if the battery pack is physically damaged or a customer is reporting a possible safety issue.

If ThinkVantage Toolbox is not installed in the computer, the customer should download this program before a non-physically damaged battery pack is replaced. Note that a physically damaged battery pack is non-warranty replacement.

DANGER:

Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.

Unlock the battery latches [1]. Holding the battery latches in the unlocked position, remove the battery pack in the direction shown by arrow [2].

x100e_batterypack.jpg

When installing: Install the battery pack in the slot, and then make sure that the battery latch is in the locked position.

Purchase parts online

  • Alias ID: MIGR-74342
  • Document ID: PD008397
  • Last Updated :17-06-14
  • (c) 2014 Lenovo